11.1V Li-Po Battery for Car Jump Starter UAV Drone 1.8-5Ah 386888 606080 5642125 4870140 7042125 957084

FMA 11.1V Li-Po Rechargeable Battery for Car Jump Starter & UAV Drone

High-performance 11.1V Lithium Polymer (Li-Po) rechargeable battery pack designed for car jump starters, UAV drones, RC vehicles, and portable power applications. Available in 6 capacity and size options from 1.8Ah to 5.0Ah, plus an optional igniter clip accessory (FCB-CDC1). All battery variants feature a 3-cell series / 1-cell parallel (3S1P) configuration. No internal PCM (Protection Circuit Module) — protection is managed by the device itself.

Key Features

• 11.1V / 3S1P: High-power Li-Po for jump starting and UAV applications
• 6 Size Options: 1.8Ah to 5.0Ah — choose exact capacity and dimensions for your device
• No PCM Inside: Bare cell pack — protection circuit integrated into the device
• Multiple Cell Models: 386888 / 606080 / 5642125 / 957084 / 7542125 / 4870140
• Brand New: Fresh stock, not refurbished or recycled cells

Package Contents

• 1× FMA 11.1V Li-Po Battery Pack (capacity and dimensions as selected)

Common Specifications

All Variants — Capacity, Dimensions & Cell Model

★ Highlighted rows = newly added models

How to Choose the Right Variant

Measure your original battery (Thickness × Width × Length in mm) and match to the Cell Model or dimensions in the table above.

• Cell Model number is printed on the original battery label (e.g. 606080, 957084)
• Measure T×W×L with a ruler or caliper if the model number is not visible
• Higher capacity = longer runtime between charges
• FCB-CDC1: Igniter/booster clamp accessory only

Applications

• Car jump starters and emergency boosters
• UAV drones and quadcopters
• RC vehicles and aircraft
• Portable power applications

Installation & Compatibility Check

• Verify cell model number: Check the label on your original battery for the cell model number (e.g. 606080) and select the matching variant
• Check dimensions: Confirm the replacement battery fits within the original housing (T×W×L must match)
• Connector compatibility: Verify discharge and balance connector types match your device before connecting
• Polarity: Confirm positive (+) and negative (−) terminals before connecting. Reverse polarity may damage the device
• Power off first: Always switch off the device before replacing the battery

Safety Information

⚠️ No PCM Inside: Use only with devices that have built-in battery protection. Do not use with unprotected circuits.

Charging: Use a compatible Li-Po balance charger for 3S packs. Charge voltage: 12.6V (4.2V/cell). Never leave charging unattended. Charge in a fireproof LiPo safe bag.

Storage: Store at ~11.4V (3.8V/cell) in a cool dry place (15–25°C). Use charger “Storage” mode for long-term storage.

Operation: Do not short-circuit, puncture, crush, or expose to fire. Avoid discharge below 9.0V (3.0V/cell).

Temperature: Operating range: 0°C to +45°C. Do not charge below 0°C.

Inspection: A swollen Li-Po battery is a fire hazard — stop use immediately if swelling, damage, or leakage is detected.

Shipping & Transportation Notice

Li-Po batteries are classified as dangerous goods. Subject to IATA regulations (UN3480/UN3481). Extended delivery times may apply due to customs and carrier handling. MSDS and UN38.3 test report available upon request.